Bicycle Wall Holder – Save Space
Store your bike vertically and free up floor space in the garage, apartment, balcony or sheltered garden.
Benefits of the Bicycle Hook
Bike Storage in a Garage and Other Spaces
Bike Storage in a Garage
Hang bikes vertically to clear the parking and circulation area.
Vertical Storage in an Apartment
Use a sufficiently strong wall to organise your bikes without leaving them cluttering the floor.
Balcony Organisation
Install the holders on a suitable wall space to keep bikes together and accessible.
Storage in a Sheltered Garden
Take advantage of the rust-resistant coating to store bikes in a protected outdoor space.
Storage for Several Bikes
The set of 4 holders creates a dedicated area for the bikes of a family or several cyclists.
The Bicycle Wall Holder in Detail
This wall-mounted bicycle holder supports the front wheel on a hook while the rear wheel rests against the wall. It provides vertical storage suitable for a garage, apartment, balcony or sheltered garden.
Non-slip strips help prevent the tyre from sliding, while the adjustable hook angle lets you adapt the holder's orientation. The rust-resistant coating allows indoor or outdoor use, taking exposure to the elements into account.
For a bike holder in a garage or an installation in a small home, choose a sufficiently strong wall and allow enough space to install and handle all 4 holders.
Installing a Wall-Mounted Bicycle Holder
- Locate a stud with a stud finder; otherwise, the instructions recommend using a beam.
- Mark the hole positions through the holder with a pencil.
- Drill the holes, insert the screws and expansion plugs, then firmly secure the holder with a drill.
- Hang the front wheel on the hook and identify the point where the rear tyre touches the wall.
- Install the protective sleeve at this contact point to help limit dirt marks.
Choosing the Right Wall-Mounted Bike Holder
- Check that the wall is sufficiently strong; a stud or beam is recommended for a more secure anchor.
- Respect the maximum load of 25 kg per holder.
- Measure the tyre width: it must be no more than approximately 5 cm.
- Make sure the wall space allows you to install and handle all 4 holders.
- Consider that the holder works with the front wheel while the rear wheel rests against the wall.
- For outdoor use, choose a sheltered location despite the rust-resistant coating.
Technical Specifications of the Wall-Mounted Bike Holder
- Brand
- Todeco
- Colour
- Black
- Quantity
- Set of 4 holders
- Actual dimensions
- 28 × 22 × 11 cm
- Weight
- 2.65 kg
- Main material
- Steel
- Mounting type
- Wall-mounted
- Maximum load per holder
- 25 kg
- Compatible tyre width
- Up to approximately 5 cm
- Bike compatibility
- Road bikes, mountain bikes, hybrids, BMX bikes, cyclocross bikes, trial bikes, fitness bikes, folding bikes and children's bikes
- Wheel and wall protection
- Hook coating, non-slip strips and wall plate for the rear wheel
- Hook
- Welded steel hook with adjustable angle
- Resistance
- Rust-resistant coating for indoor or outdoor use
- Included items
- 4 wall-mounted holders, screws and expansion plugs
- Reference
- 0265-T-2
Questions About the Wall-Mounted Bicycle Holder
How do I install a bicycle wall mount safely?
Locate a wall stud with a stud finder for the most secure anchoring. If no stud can be used, the instructions recommend a beam. Mark the holes with a pencil, drill them, then secure the holder with the supplied screws and expansion plugs.
Will this bike wall mount work on a crumbly wall?
The wall must be strong enough to support the load. The supplied plugs cannot compensate for a crumbly or insufficiently strong surface.
What is the maximum load for this bicycle wall rack?
The maximum load is 25 kg per holder. Check your bike's weight before installation, especially for an electric or particularly heavy bike.
What tyre width fits these bike hooks for wall storage?
The hook fits tyres up to approximately 5 cm wide. Wider tyres may not be compatible.
How can I hang a bike on the wall without marking it?
The bike hangs by the front wheel while the rear wheel rests against the wall. Once the bike is positioned, mark the rear-wheel contact point and install the protective sleeve there as shown in the instructions.
Does this bike rack wall hook support the frame or the wheel?
The system is designed to hold the bike by the front wheel on the hook. The rear wheel rests against the wall, protected by the dedicated sleeve.
Can I use this bike holder for garage storage outdoors?
In a garden or on a balcony, however, the installation remains exposed to the elements.
Are screws and wall plugs included with the bicycle stand wall mounted?
The set includes 4 wall-mounted holders plus screws and expansion plugs. The instructions show 2 sets of 4 screws with their plugs.
How much space do I need for four bicycle hangers for garage storage?
Allow enough wall space to fix all 4 holders and manoeuvre each bike.
Can the hook and wall protectors wear out over time?
Check the plastic, foam or rubber protectors regularly to prevent direct metal contact with the tyre or wall.
Customer reviews
You may also like
Ready to go?
Shipping included · 30-day returns