Telescopic ladder 6-in-1 — up to 478 cm
Reach high areas and adapt your ladder to every job, at home or at work.
Benefits of the 6-in-1 aluminium telescopic ladder
Ladder scaffold: possible uses
Ceiling repairs
Use the suitable configuration to change a light bulb or carry out a ceiling repair.
Painting and renovation
Adapt the structure for painting, decorating or renovation work at home.
High-level access
Extend it into the straight position to reach high areas.
Work on stairs
Choose the configuration designed for working on stairs.
Work platform
Set up the structure in one of the intended horizontal positions to use the platform.
Professional DIY
Switch between configurations for maintenance, fitting-out or repair work.
Storage after use
Fold the equipment with the push buttons after the job to simplify storage.
Reach high areas and adapt your ladder to every job
Reach high areas and adapt your ladder to every job, at home or at work.
The multifunction folding ladder in detail
This multifunction telescopic ladder adapts to everyday jobs and professional work. Its straight configuration reaches up to 478 cm, while the stepladder position measures approximately 232 cm.
For work on stairs, the dedicated configuration turns the equipment into a stair ladder. Its horizontal positions also allow you to use the work platform provided by the design.
The safety hinges feature locking and unlocking positions. After every opening, check that all hinges are correctly locked and that each pair is engaged at the same time.
The stabiliser bar attaches to the ends of the rails with a nut and bolt before first use. Always place the ladder on a flat, solid surface, then check its stability before climbing.
Made from rust-resistant aluminium alloy, this folding ladder folds with push buttons for easier storage. Its 12,9 kg weight should be considered when moving and installing it.
Whether you are comparing an ext ladder, extender ladder or extension ladder, this 6-in-1 design offers multiple working positions in one piece of equipment.
Setting up your multifunction ladder
- Attach the stabiliser bar to the end of the side rails with the nut and bolt before use.
- Move the hinge handle to “O” to unlock and fold the structure.
- Unfold the ladder: the hinges lock automatically into position.
- Check that all hinges are locked and that each pair is engaged at the same time.
- To open the ladder section, place the black pin on “O”; locking is complete when the pin is on “L”.
- Place the ladder on a flat, solid surface, then check its stability before climbing.
Choosing equipment for work at height
- Check whether you need a maximum reach of 478 cm in the straight position or an approximately 232 cm height in the stepladder position.
- Plan for a flat, solid surface for installation.
- Allow for the 12,9 kg weight when moving and setting it up.
- Respect the maximum load of 150 kg, including the user and equipment.
- Choose only the configuration suited to your task: straight ladder, stepladder, scaffold, aerial ladder, stair scaffold or storage.
- Use the platform only in the intended horizontal positions.
Caring for your collapsible ladder
- Lubricate the hinges regularly with a good-quality lubricant.
- Clean the hinges after use, especially after exposure to dust or dirt.
- Clean the area with warm water if needed, without applying water directly to the hinges.
- After drying, lubricate the hinges again.
- Do not use the ladder if any part is missing, damaged or worn.
- The aluminium alloy resists rust and does not deteriorate over time.
6-in-1 ladder specifications
- Actual dimensions when extended
- 478 × 35 × 6,5 cm
- Weight
- 12,9 kg
- Maximum reach in straight position
- 478 cm
- Height in stepladder position
- Approximately 232 cm
- Number of rungs
- 16
- Maximum load
- 150 kg
- Configurations
- 6-in-1
- Position compatibility
- Straight ladder, stepladder, scaffold, aerial ladder, stair scaffold and storage
- Angle in straight position
- 75,5 degrees
- Material
- Aluminium alloy
- Standard
- EN131
- Storage type
- Foldable
- Reference
- 0060-T-1
Telescopic stepladder questions
Is this telescoping extendable ladder heavy to move?
It weighs 12,9 kg. This weight contributes to the equipment’s robustness, but plan carefully for installation, especially when fitting the stabiliser bar.
How do I fit the stabiliser bar before first use?
Position the stabiliser bar at the end of the side rails, then secure it with the nut and bolt supplied with the fastening system.
How do I lock the hinges correctly on this foldable ladder?
To fold a ladder inward, move the handle to the “O” unlock position. After unfolding, the hinges lock automatically.
How tall is the ladder straight or as a stepladder?
In the straight ladder position, the maximum reach is 478 cm. In the stepladder position, the height is approximately 232 cm.
Can I use this ladder on stairs?
Yes. One of the 6 configurations is designed as a stair scaffold. Use only the intended positions and check stability before climbing.
Can I use the platform in every configuration?
No.
Can this collapsible ladder be set up on uneven ground?
It must only be installed on a flat, solid surface.
How do I maintain the hinges on this folding ladder?
Do not apply water directly to the hinges; after cleaning the affected area with warm water, let it dry and lubricate the hinges again.
Does this ladder that folds store easily?
Yes. No exact folded dimensions are provided, so allow suitable storage space for the folded equipment.
Is this telescopic loft ladder certified for working at height?
The equipment is EN131 certified. Follow the intended positions, the 75,5-degree angle in the straight position and the locking instructions before use.
Customer reviews
You may also like
Ready to go?
Shipping included · 30-day returns